能源动力系
能源动力系
当前位置: 首页 >> 师资队伍 >> 师资队伍 >> 正文

王红

2022-03-12  点击:[]

王红


博士 副教授 硕士生导师


联系方式:18841125097


通讯地址:大连市凌海路 1 号科学会馆315


电子邮箱:hwang@dlmu.edu.cn


教育背景

2005.05-2008.11     英国格林威治大学,流体机械,博士

2003.09-2004.07     法国巴黎第十一大学,流体动力与转换,硕士

1994.09-1998.07     哈尔滨工程大学,热力发动机(汽轮机)专业,工学学士

工作履历

2016.07-至今     大连海事大学,船舶与海洋工程学院,副教授

2011.02-2016.0       常州大学,石油工程学院,副教授

2008.11-2010.08     英国格林威治大学,计算与数学科学学院,研究员

2004.08-2004.12     法国巴黎第十一大学,Orsay的科学研究中心(CNRS)的实验室LIMSI助理研究员(Research Assistant)

1998.07-2004.03     北京核工业第二研究设计院,三室,助理工程师

研究领域

1、多相流及传热传质的数值研究

2、燃烧过程及火焰传播数值研究

3、液固边界的耦合的算法研究

4、多物理过程的数值研究等

科研项目

纵向科研课题

1、作为负责人主持辽宁省自然科学基金计划项目

  题目:涡轮内固体颗粒的沉积与传热特性研究(项目编码:20180550685),已结题,2018-2020

2、作为负责人主持江苏省高校自然科学研究重大项目

  题目:小尺度流动模型中的自由表面流的数值与实验研究(项目编码:15KJA470001),已结题2015-2018

3、作为负责人主持国家自然科学青年基金项目

  题目:一种新的自由表面捕捉方法及其与表面张力耦合的研究(项目编码:51306024),已结题2014-2016

4、作为负责人主持江苏省基础研究计划(自然科学基金)面上项目

  题目:非定常风场风力发电叶轮系列化关键技术研究(项目编码:BK2011234),已结题,2012~2014

5、作为负责人主持国家教育部留学回国人员科研启动基金

  题目:多相流中自由表面追踪数值方法的研究,已结题2013-2014

6、作为负责人主持常州市应用基础研究计划项目

  题目:风力发电机叶轮系列化设计的实验与数值研究(项目编码:CJ20110021),已结题,2011-2013

7、作为负责人主持常州大学校基金

  题目:多相流中自由表面追踪数值方法的研究(项目编码:ZMF11020019),已结题,2011-2013

8、作为主要参与人,参加国家自然科学基金项目

  题目:渗流射流耦合作用下纤维空调末端气流流动规律与换热机制(项目编码:51308077),已结题2013-2016

9、作为主要参与人,参加了欧洲空间局与欧洲委员会资助的项目IMPRESS

  题目:Numerical Modeling of the Tilt Casting Process, EU: IP project IMPRESS (NMP3-CT-2004-500635),已结题,2005-2009

横向科研项目

1、题目:活塞冷却流动分析(项目来源:中船动力研究院有限公司),主持,2019-2020

2、题目:船用低速柴油机喷嘴内流场研究(项目来源:中船动力研究院有限公司),主持,2019-2020

3、题目:红沿河H4机组ARE043/046MD虚假显示建模分析(辽宁红沿河核电站有限公司),主持,2020

4、题目:计算主蒸汽疏水系统异常对主蒸汽压力的影响(辽宁红沿河核电站有限公司),主持,2020

5、题目:CEX024VL阀体及下游扩散管设置合理性验证(辽宁红沿河核电站有限公司),主持,2020

6、题目:排烟管隔热包覆热力计算分析(项目来源:私企),主持, 2018.

学术成果

代表性论文

1. Hong Wang, Zhimao Zhu, Hancong Xu, Jialong Li. Effects of throttling structures on cavitation flow and circumferential uniformity in a control valve. Engineer Failure Analysis, 2022, 134-106025

2. Hong Wang, Miao Zhang, Jialong Li, Junpeng Wang. Numerical study on CMT boron replenishment strategy for an AP1000 nuclear power unit. Nuclear Engineering and Technology, 2022, in press.

3. Hong Wang, Zhimao Zhu, Miao Zhang, Jinlong Han. Numerical investigation of the large over-reading of Venturi flow rate in ARE of nuclear power plant. Nuclear Engineering and Technology, 2021, 53:69-78.

4. Hong Wang, Zhimao Zhu, Miao Zhang, Jie Li, Weiqi Huo. Investigation on cavitating flow and parameter effects in a control valve with a perforated cage. Nuclear Engineering and Technology, 2021, 53:2669-2681.

5. Hong Wang, Miao Zhang, Junpeng Wang, Zhitao Tian. Numerical study of boron diffusion in CMT and related thermal fatigue near cold legs of an AP1000 nuclear power unit. Progress in Nuclear Energy, 2021,132:103592.

6. Hong WANG, Entian LI, Yanchen SU, Jingjun ZHONG. Further development of 3D/1D patched transient heat transfer model. IHTC-16, 2018. 8.10-15, Beijing.

7. Hong Wang, Shuli Wang, Xiaobing Wang, Entian Li. The development of a 3D/1D round patched transient heat transfer model for the simulations of heat transfer through casting-mould. Numerical Heat Transfer, Part A, 2015, 67(4): 401-413.

8. Hong Wang, Shuli Wang, Xiaobing Wang, Entian Li, Numerical modelling of heat transfer through casting-mould with 3D/1D Patched Transient Heat Transfer Model. Int. J. Heat and Mass Transfer. 2015, 81: 81-89.

9. H. Wang, G. Djambazov, K. Pericleous. Analysis of Heat Transfer through the Casting-mould Interface Including Gas-Gap Effect and Application to TiAl Castings. Int. J. Numer. Methods for Heat & Fluid Flow, 2013, 23(4): 707-724.

10. H. Wang, G. Djambazov, K. Pericleous, R. A. Harding, M. Wickins. Modelling the Dynamics of the Tilt Casting Process and Effect of the Design of the Basin/Feeder on the Casting. Computers & fluids, 2011, 42: 92-101.

11. Hong Wang, G. Djambazov, K. Pericleous. Numerical study of crucial parameters in tilt casting for titanium aluminides. CHINA FOUNDRY, 2011, 8(3):274-281.

12. H. Wang, G. Djambazov, K. Pericleous. Numerical Modelling of the Tilt Casting Process for γ-TiAl Alloys. Int. J. Cast Met. Res. 2012, 25(2):65-73. (Re-published by Foundry Trade Journal, awarded the British Foundry Medal for 2014).

13. Hong Wang, Shihe Xin and Patrick Le Quéré. Étude numérique du couplage de la convection naturelle avec le rayonnement de surfaces en cavité carrée remplie d'air. Comptes Rendus Mecanique, 2006, 334(1): 48-57 (in French).

14. H. Wang, G. Djambazov, K. Pericleous, R. A. Harding, M. Wickins. Modelling the tilt-casting process for the tranquil filling of titanium alloy blades. Modelling of Casting, Welding and Advanced Solidification Processes XII, TMS, 2009, 53-60.

15. Peng Sun, Wenguang Fu, Hong Wang and Jingjun Zhong. Numerical research on inlet total pressure distortion in a transonic compressor with non-axisymmetric stator. Proc IMechE Part G: J Aerospace Engineering, 2019, 223:667-678

16. Benli Peng, Zhengyu He, Hong Wang, Fengmin Su. Optimization of patterned-fins for enhanced charging performances of phase change materials-based thermal energy storage systems. Int. J. Heat and Mass Transfer. 2021, 164-120573.

17. R. A. Harding, M. Wickins, H. Wang, G. Djambazov, K. Pericleous. Development of a Turbulence-free Casting Technique for Titanium Aluminides. Intermetallics, 2011, 19(6) : 805-813.

18. K. A. Pericleous, G. Djambazov, H. Wang, Numerical Modelling of the Low-superheat casting of Thin-section components. MCWASP Conf. XI, France, 2006, 103-110.

19. R. A. Harding, M. Wickins, H. Wang, G. Djambazov, K. Pericleous. The Development of a Tranquil Tilt Pouring Process for Casting Titanium Aluminides. TMS Symposium on Structural Aluminides for Elevated Temperature Applications, New Orleans, 2008, 15-22.

20. R. A. Harding, M. Wickins, H. Wang, G. Djambazov, K. A. Pericleous. The Tilt Casting of Titanium Aluminides. Liquid Metal Processing and Casting, LMPC, 2007, 207-212.

专利

1、软件注册权: MPSS (Multi-Physic Simulation Software) 多物理场模拟仿真软件,(登记号:2010SR050533)2010;

2、发明专利:自供电的传感网流量计,(授权号:CN 1003557892B),2016.07.06.

荣誉与奖励

1、欧洲空间局2009年度IMPRESS杰出青年研究员奖(IMPRESS Young Researcher Prize 2009 from European Space Agency), Budapest, Hungary, 2009;

2铸造工程师协会颁发的英国铸造奖章(British Foundry Medal for 2014), Alrewas, UK, 2014.

讲授课程与研究生培养

本科生课程:工程流体力学、泵与风机、专业英语

研究生课程:工程伦理、专业英语


上一条:韩少冰 下一条:彭本利

关闭